Software updates of the OP8110 may be required from time to time. Once it is connected to the network, you should test communication by pinging the OP8110 from your computer.įlashing a new bitstream 1. Your OP8110 is now ready to use and can be connected to your network. A confirmation screen appears (Figure 19). Type the following information in the next screen (Figure 18): IP address, Netmask and Gateway (your IT department should provide you with the information).

In the next screen, select '2 Statically' and click OK.In the OP4200 System Configuration screen (Figure 16).Click OK to start the session, which opens the OP4200 System Configuration screen.Select the serial (COM) port to which the OP8110 is connected (it should appear automatically in the list).In the Session Settings window, click the Serial Button.Click the Sessions button to start a new session.Extract the contents of the zip file and double click on the extracted executable of MobaXterm i.e.: MobaXterm_Personal_20.2.exe the program will start (Note that there is no need to install anything on your computer).Save the file in a known location on your computer.Select the Portable edition of MobaXterm Home edition.Select the Home Edition version of MobaXterm and click Download Now.Using an internet browser go to MobaTek’s mobaXtem website:.Install the serial terminal application (MobaXterm) on your computer:.

Connect the Mini USB connector end to the Mini USB Receptacle connector on the OP8110.

It also allows users to perform various troubleshooting or reflashing activities. The Mini USB Cable enables users to connect the OP8110 to a PC to access the IP address modification interface. If there is no serial terminal installed, you must install one (such as MobaXterm) to access the OP8110 configuration application. (Be sure to contact your IT department to obtain a valid IP address from them).īefore you begin, make sure your computer has a serial terminal program installed you will need it to access the 'OP8110 Recover' application. The best way to do this is to directly connect your OP8110 to your host computer (laptop, etc.). The OP8110 is pre-configured with an IP address (an identifying label will be attached to the unit), but it may conflict with your network infrastructure you may need to change the IP address for your 4QPA.

Mobaxterm portable edition